Aura SmartShade
(WiFi Dongle version)
STEP 1 - PHYSICAL INSTALL: Initial Set Up
How to install the Aura SmartShade
When installing the Aura Smart Shade:
1. Remove the back mounting plate from the device by gently lifting the bottom tab away from the device, and pulling down.
2. Take the provided adhesive strip and remove the red film.
3. Align the exposed sticky side of the adhesive strip to the back of the mounting plate, press firmly to get a good seal.
4. Slide the back mounting plate back onto the smart shade unit from the bottom, ensuring that you hear it click into place.
5. Remove the protective top cover by gently sliding it up, and expose the sprocket wheel. (Please set-aside the protective top cover. (This will be used at the end of the set up).
2. Take the provided adhesive strip and remove the red film.
3. Align the exposed sticky side of the adhesive strip to the back of the mounting plate, press firmly to get a good seal.
4. Slide the back mounting plate back onto the smart shade unit from the bottom, ensuring that you hear it click into place.
5. Remove the protective top cover by gently sliding it up, and expose the sprocket wheel. (Please set-aside the protective top cover. (This will be used at the end of the set up).
- NOTE: We have included 4 sprocket wheels to fit the style of beaded chain you have in your set up. The universal default sprocket is already attached to the Smart Shade.
- Optionally, you can replace it with a sprocket that looks to be a better fit for your chain (based on the size of the beads, and the distance between them). If you would like to use a different sprocket, firmly pull the default sprocket away from the smart shade to remove it. Once you select your preferred sprocket, align the sprocket wheel to the peg and press it all the way down for a secure fit.
6. Use a dry cloth to wipe down the area on the wall where the smart shade will be mounted. This will remove any dirt, dust or debris.
7. Remove the protective film from the adhesive strip located on the backplate.
8. With the adhesive exposed on the back plate turn the adhesive side towards the wall – DO NOT MOUNT TO WALL YET.
9. Take the beaded chain and place it onto the sprocket wheel.
10. Pull the smart shade device downwards so that the chain tension is tight.
11. Move the smart shade unit approximately 4cm forward (towards yourself) so that it doesn’t interfere with your shades when they are in the closed position. (Make sure there is enough space between the device and your shades to avoid contact during use).
12. With the protective top cover - you will see 2 large panels located near the top on both the left-side and the right-side, press these panels in and out continuously until they break off. The exposed opening will allow for your beaded chain to pass through smoothly once the aura smart shade is installed.
13. Slide the protective top cover over the exposed sprocket wheel and beaded chain.
Next, you will need to pair your device to the app.
More to Explore
STEP 2 - PAIRING: How to Pair Device to the App
STEP 3 - CALIBRATION: How to Set Top/Bottom Positions
How to Pair with Remote Control
How to Set Up Schedules
How to Set Up Groups
Connect to Smart Home
Why choose Aura SmartShade?
2-Months
BatteryLife
BatteryLife
Easy
Installation
Installation
Keep the Blinds
you Love
Universal Beaded
Chain Support
General FAQs
How do I operate the SmartShade?
For detailed instructions on operating your the Aura SmartShade, please refer to the comprehensive user manual. It contains step-by-step guides, troubleshooting tips, and important safety information.
- Preview: Preview the User Manual (PDF)
- Download: Download the User Manual (PDF, 1.7MB)
Can I use the Aura SmartShade without WiFi?
No Wi-Fi necessary – AURA SmartShade is Bluetooth enabled which means it can be controlled via the app. It has been set up with local control options that don’t rely on a Wi-Fi connection. For specific features, this will require the use of a TUYA hub.
What is the maximum blind weight supported?
The recommended maximum weight for roller blinds is 3kg. Exceeding this limit may strain the motor and reduce its lifespan.
Does the Aura Smart Shade work with Alexa or Google Assistant?
Yes, but only when paired with the TUYA Hub (sold separately). Without the hub, the driver only supports local Bluetooth control.
How long does the battery last?
The built-in rechargeable battery lasts up to 2 months on a single charge.
How is the Aura Smart Shade device installed?
Installation is simple and does not require a professional or tools. Everything you need is included in the box, and should take only a few minutes.
How do I recharge the battery?
The driver uses a USB-C charging port. A USB-C to USB-A cable is included in the box.
We are here for you
Need extra assistance?
Email our support team at support@livewithaura.com
